The National Synchrotron Light Source is a state-of-the-art, medium-energy (3-billion-electron-volt, or GeV) electron storage ring that produces x-rays up to 10,000 times brighter than the NSLS. The mission of the National Synchrotron Light Source is to provide extremely bright x-rays for basic and applied research in biology and medicine, materials and chemical sciences, geosciences and environmental sciences, and nanoscience. To support this program, the NSLSII must design, fabricate, assemble, test, install, and operate unique research equipment to generate, transport, transfer, accelerate and focus electron and X-ray beams. This includes a combination of custom designed and built parts and vendor produced components developed by a collaboration of the NSLSII scientific, engineering, and technical staff. The NSLSII supports an international user community of over 2,200 researchers from 400 universities. The NSLSII performs all these functions in an environmentally responsible and safe manner, under a rigorous conduct of operations approach.

Position Description

The NSLS-II RF Group designs, fabricates, operates, and maintains multiple high power Radio Frequency (RF) systems, including superconducting RF cavities cooled by a 4-Kelvin liquid-helium cryogenic plant. The cryogenic plant consists of two 870-watt refrigerator/liquefier coldboxes, two 3,500L dewars, three compressors, a purifier, and associated manifold box and valve boxes, helium buffer tanks, transfer lines and a liquid Nitrogen system that supports coldbox operation. This position is responsible for the continued development, operation and optimization of the cryogenic plant, and related mechanical and utility systems. The successful candidate is expected to learn on the job all cryogenics-related concepts. You will work as a productive and collaborative member of a multidisciplinary team of engineers and technicians through all phases of sub-system design, component selection, prototyping, fabrication, installation, commissioning, operation, and troubleshooting.

Essential Duties and Responsibilities:

• Develop, commission, operate, troubleshoot and repair of cryogenic system and sub-systems, including limited off-hours support.

• Perform analysis, simulation and calculation of cryogenic and mechanical components and systems using tools such as ANSYS, Gaspak, REFPROP, CST and related codes.

• Assist in the cryogenic operation of superconducting cavities.

• Design, procure, and/or develop cryogenic subsystems to meet evolving accelerator requirements.

• Generate and maintain schematics, process flow diagrams, work instructions and technical documentation.

• Develop maintenance schedules and work plans for operating cryogenic systems.

• Maintain current knowledge of principles, methods, and best practices within the related fields.

• Mentor junior engineering and technical staff.

Required Knowledge, Skills, and Abilities:

• B.S. in Mechanical Engineering, Chemical Engineering, Cryogenic Engineering or Physics with a minimum of seven (7) years of relevant experience, including at least five (5) years of combined experience in development and operation of cryogenic systems or similarly complex mechanical systems with a demonstrated record of successful contributions.

• Demonstrated experience with structural or thermal simulation tools such as ANSYS, CST, Refprop, Gaspak, Aspen HYSYS, or equivalent multiphysics analysis software.

• Experience of using common components, tools and equipment, such as pressure gauges, temperature sensors, cryogen level sensors, flow meters, pressure relief valves, control valves and pressure relief valves.

• Excellent written and verbal communication skills.

• Strong interpersonal skills with the ability to work effectively in a diverse technical team environment.

• Availability for limited off-hour on-call support for urgent operational issues (typically < 2%).

Preferred Knowledge, Skills, and Abilities:

• B.S. in Mechanical Engineering, Chemical Engineering, Cryogenic Engineering or Physics with a minimum of ten (10) years of relevant experience.

• Master’s in Mechanical Engineering, Chemical Engineering, Cryogenic Engineering or Physics with a minimum of seven (9) years of relevant experience.

• Experience with cryogenic systems and components for superconducting cavities or magnets for accelerator applications.

• Experience in pressure and cryogenic safety analysis.

• Experience with process controls and feedback loops.

Environmental, Health & Safety Requirements:

• Hand / eye coordination

• May be required to walk up to 0.5 mile & climb stairs to access equipment

• May be required to lift 30 lbs.

• May be required to climb ladders for equipment service and inspection

• May be required to occasionally work off-hours, nights and/or weekends to support mission critical projects

Other Information:

• This is an onsite position.

• The candidate must be legally authorized to work in the U.S.

Brookhaven National Laboratory is committed to providing fair, equitable and competitive compensation. This is a multi-level role and the full salary range for this position is $113,050.00 - $195,000.00 / year. You will be placed at the level and salary commensurate with your experience. Salary offers will be commensurate with the final candidate’s qualification, education and experience and considered with the internal peer group.

Brookhaven National Laboratory is committed to employee success and we believe that a comprehensive employee benefits program is an important and meaningful part of the compensation employees receive. Review more information at BNL | Benefits Program

Brookhaven National Laboratory requires all non-badged personnel including visitors to produce a REAL-ID or REAL-ID compliant documentation to access Brookhaven National Laboratory – view more information at www.bnl.gov/real-id . This is due to nationwide identification requirements for federal site access as required by the federal REAL ID Act . Those not in possession of a REAL ID-compliant document will not be permitted to access the site which includes access to the Laboratory for interviews .

About Us

Brookhaven National Laboratory (www.bnl.gov) delivers discovery science and transformative technology to power and secure the nation’s future. Brookhaven Lab is a multidisciplinary laboratory with seven Nobel Prize-winning discoveries, 37 R&D 100 Awards, and more than 70 years of pioneering research. The Lab is primarily supported by the U.S. Department of Energy’s (DOE) Office of Science. Brookhaven Science Associates (BSA) operates and manages the Laboratory for DOE. BSA is a partnership between Battelle and The Research Foundation for the State University of New York on behalf of Stony Brook University. BSA salutes our veterans and active military members with careers that leverage the skills and unique experience they gained while serving our country, learn more at BNL | Opportunities for Veterans at Brookhaven National Laboratory .

Equal Opportunity/Affirmative Action Employer

Guided by our core values of integrity, responsibility, innovation, respect, and teamwork, Brookhaven Science Associates is an Equal Employment Opportunity Employer-Vets/Disabled. We are committed to fostering a respectful and collaborative environment that fuels scientific discovery. We consider all qualified applicants without regard to any characteristic protected by law. All qualified individuals are encouraged to apply. We ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. *VEVRAA Federal Contractor

BSA employees are subject to restrictions related to participation in Foreign Government Talent Recruitment Programs, as defined and detailed in United States Department of Energy Order 486.1A. You will be asked to disclose any such participation at the time of hire for review by Brookhaven. The full text of the Order may be found at: https://www.directives.doe.gov/directives-documents/400-series/0486.1-BOrder-a/@@images/file